The 2003 Lincoln Navigator has assorted components to its dashboard. These components and panels are attached by many screws. Once the screws are removed, the components can easily be removed one by one.1. Turn off the Navigator's engine and unlocked the hood. Adoption a socket wrench to remove the con cable from the battery to prevent the airbags from activating while you are removing the dashboard.2.
Removing the dashboard is a time-consuming measure, however it is quite straightforward. The Emigration of the Navigator's dashboard is a exigent procedure for distinct preservation tasks, such as replacing the sprint lights and checking the vehicle's heater core.
Instructions
Remove the four fasteners from the centre faceplate, one at Everyone corner. Whether you are having dispute removing the clips by share, end a flat-head screwdriver to carefully pry them gone so you don't disjunction them. Remove the faceplate. This Testament avow four screws at Everyone corner. Remove the screws with a Phillips screwdriver.
3. Pull the center dashboard console forward to disclose the electrical connectors to the radio, the AC unit and the cigarette lighter. Detach all three connectors by pulling them off their respective devices. Pull the radio and the AC unit elsewhere, followed by the centre dashboard console.
4. Remove the glove compartment by opening it and squeezing the tabs on the sides. Pull it out to remove it. Remove the kick panels on the passenger's and driver's side by detaching their two securing screws and pulling the panels off.
5. Remove the four screws around the instrument cluster and lower the steering wheel. Use a flat-head screwdriver to pry out all the air conditioning vents, the fuse panel to the far left of the instrument cluster, the headlamp switch cover, the two panels on each side of the steering wheel and the panel above the glove compartment. Remove the eight screws along the windshield at the top of the dashboard trim. Pull the dashboard out of the Navigator.
