Slide hammers come in two leading sizes, doozer and tiny, and are typically used for driving rods into the ground or removing dents from cards. The leading departure between the two, aside from magnitude, is that the larger slide hammer requires you to procedure the hammer downward while the leading intention of the smaller slide hammer is to modification the hammer up. Whether you result Correct procedure and safety guidelines, the slide hammer does all the assignment for you.
Cook up positive to carry both hands on the handles at all times, and evaluation for any Metro utilities or lines before you commence working to bring about undeniable you don't hit anything.Catch the sampler rod you appetite to operate into the ground, and screw the slide hammer anvil onto the top. Screw the probe rod onto the slide hammer anvil. It Testament be on top of the anvil, and this probe rod first off serves as your conductor rod.
Operating a Large Slide Hammer
The enormous slide hammer is a effective personal computer, and disquiet should be taken when using it. Always cook up firm the loop pull cap is screwed onto the top before using it; otherwise the hammer could fly off and hit you.It Testament not drive into the ground. Levy the slide hammer onto the ground, and slide the coerce rod into it. It should come to rest on the anvil. Hoist the plentiful unit into the upright position, and cause decided your hands are elsewhere from the anvil so they are not smashed provided the slide hammer manages to rise slightly and fall. Screw the loop pull cap onto the top of the criterion rod. This action is substantial, and you should always twofold proof that the loop pull cap is in compass.
To end the slide hammer, place the sampler rod on the bottom over the area you want to drive it into. Then raise the slide hammer, and slam it down onto the anvil. Raise it only as high as you can comfortably reach, and never let go of the handles. You want to drive it downward with your hands, not drop it. Repeat this procedure as many times as needed to drive the sampler rod into the ground.
Operating a Small Slide Hammer
For the small, handheld slide hammer, hook or screw the end into the dent you wish to remove. Check that it is securely in place. When you first use the slide hammer, it is better to use less strength than you think you'll need. If the dent doesn't come out, you can use more strength. If you use too much, however, it can rip the metal.
Grip the handle firmly in one hand and the slide in the other. The slide should be at the bottom of the rod. Slam it upward into the handle, and the force will pull out the dent. Once again, be careful not to slam it too hard or you'll rip the metal.
