Assorted designs of bicycle brakes exist to fair the exclusive demands of colorful types of bicycles. The side-pull brake was designed for employ on a course of action bike and derives its agname from the residence and animation of the brake cable. The cable is attached to the side of the brake, and during system of the brake, the cable pulls the two brake arms toward the turn. Depending on the representation and hour of the side-pull brake, the follower Testament have need either an adjustable wrench or 5-mm hex basic.3. Angle the pad until it is much with side of the rim.
1. Pull the brake lever in toward the handlebar of the bicycle. Everyone pad squeezes the side of the rim of the revolve. Both pads should happy the rim squarely for competent braking. Provided either pad is angled up or down, accustoming is required.
2. End a Correct wrench to loosen the stone securing the pad housing to the brake arm. The brake should be inspected periodically and adjusted as needed to preserve Correct performance.
Instructions
Brake Pad Angle
Hold the pad steady while re-tightening the nut to secure the adjustment.
Brake Cable Tension
4. Pull the brake lever in toward the handlebar. Brake cable tension determines Until when the lever travels before the brake engages the wheel. If the braking feels "spongy," the cable is too loose. If the braking is over-responsive, the brake cable is too tight. Adjustment is required.
5. Note the barrel-shaped nut where the cable and brake first meet. The nut allows for tension or be added or removed from the side-pull brake cable.
6. Turn the nut counterclockwise to increase cable tension. Turn the nut clockwise to diminish cable tension. Give the nut no more than a one-quarter turn before checking the adjustment.
7. Pull the brake lever to check the adjustment. Adjust to personal preference. If adding tension to the cable, be careful when riding the bicycle for the first time. Responsive braking means that the brake engages sooner. Use a light touch when operating the brake to receive the feel of the adjustment.
