A damaged window regulator in your Two thousand one Chrysler Town and Nation can lay your vehicle at grim risk of activity stolen provided you are unable to securely rapid your window. Whether this disputed point does action, you must flash to modify the window regulator in your vehicle straightaway, exceptionally provided your vehicle is not kept overnight in a secure earth such as a garage. You can pick up a replacement window regulator from your resident Car parts store.
Instructions
1. Bare up the door that has the damaged window regulator and place the screws that place the door panel to the inside of the door.
2. Employment a Phillips screwdriver to remove the screws from the door panel. Pull the door panel absent from the door and establish it to one side. Lay the screws in a unharmed habitat as you Testament devoir to reattach them consequent.
3. Pull the baptize deflector gone from the inside of the door. This can be done by pulling it out from the door with your hands until it comes free. Place the deflector with the previously removed door panel.
Place the new window regulator into the door access panel. Secure it in place with the mounting bolts. Connect the electrical connector from the motor in to the regulator. Line up the regulator with the window pane and secure them both together with the hex bolts. Remove the mounting bolts from the bottom of the regulator. Unhook the electrical connector from the motor with your hand and pull the regulator away form the door.
5.4. Use your hex wrench to remove the hex bolts which connect the window pane to the window regulator. Place a block of wood underneath the window to stop it from falling down into the access panel. Reattach the rest of the door assembly by following the removal steps in reverse.
