A broken stud causes excessive enterprise for the Chauffeur. Much though it's aloof one stud, it places additional stress on the others and can generate them to snap, very. You can exchange the stud on your Nissan Maxima with equal a brief mechanical force, the licence tools and some brute pressure.
Take off the parking brake cable in the rear and they're drum brakes; remove the drum. If you must, remove the hub, use a vice to hold it and skip To pace 5.4. Look for a clearance behind the hub.
It's a fine approximation to examine the other studs at the alike date to behold whether you occasion to transform them as well.
2. Scrutinize in the Timber to asset the jack and tools. The tools are under the Floor-mat in front of the spare and the jack is on the passenger side wall of the trunk inside the jack compartment. Jack up the car.
3. Take off the wheel. The front and sometimes the back are disc brakes. Remove the caliper and rotor.
Instructions
1. Shop for a fresh stud. Provided you are unaware of the amount, wait until you cut it off and returns it to the parts store with you.If there's adequate clearance, line the stud up with the area.
5. Hit the stud with a mallet to drive it back through the hub and out of the area. If it doesn't go all the way through, put a narrower rod on the stud and smack it to finish the job. Insert the new stud. Push it through enough so you can thread a wheel bolt on it.
6. Thread a wheel bolt on and tighten down the bolt with an impact wrench if you have one. As the wheel bolt tightens down it pulls the stud through the hub. You'll need to add extra bolts as the stud comes out further.
7. Remove the bolts and reassemble the parts that you took off to replace the stud on your Nissan Maxima. Do this in reverse order of disassembly. Put on the wheel and tighten down the wheel bolts.
