Modify a 2001 Pontiac Grand Prix Ignition Switch
The ignition switch in the 2001 Pontiac Grand Prix is used to begin the vehicle. Whether your Grand Prix doesn't originate, and you keep checked both the starter and the alternator, the practicable occupation is a defective ignition switch. Unclip the retaining pin with a small screwdriver and remove both the ignition switch and lock cylinder from the steering column.5. Disconnect the locking tab that connects the lock cylinder and ignition switch.
Applicability a wrench to remove the clamp bolt from the opposite battery terminal. Lift the contrary cable outside from the terminal.
2. Lift the steering turn include from the steering spin. Lift the tabs all over the border of the revolve elsewhere from their connectors to remove the involve. Whether you are struggling to cause it with your hand, use a small flat-head screwdriver to carefully pry it off.
3. Remove the two screws attached to the steering column sleeve using a Phillips screwdriver. Slide the sleeve away from the steering column. Locate the ignition switch. Use the adjustable wrench to remove the mounting bolts from the switch.
4. Place your key in the ignition and move it to the locked position. This will give you access to the retaining pin. You Testament treasure trove the switch in your steering borderline whether you craving to moderate it yourself.
Instructions
1. Expansive up the Grand Prix's hood and set the battery.Attach the new ignition switch to the lock cylinder. Press them together until they lock in place. Reattach the ignition switch and lock cylinder to the vehicle by following the removal steps in reverse. Attach the negative cable back on to the terminal. Turn on the engine to make sure the new switch works.
