Removing your Rinehart baffles Testament replace the exhaust comment of your bike.
Rinehart exhausts are manufactured by motorcycle exhaust association Bub Enterprises. Externally, the pipes are resembling to Bub exhausts. Rinehart exhausts come with replaceable bound caps. You can moderate your Rinehart baffles easily.
Instructions
1. Remove the foot caps on both mufflers by loosening the two screws with a 3/16-inch Allen wrench. The borderline cap screws are located at Twelve o'Watch and Three o'Watch as you face the head of the exhaust from latest the motorcycle. They are approximately one-half inch from the cusp cap muffler Seam.
2. Loosen the worm clamps that secure the heat shields to the mufflers with a flat-head screwdriver. Heat shields are easily identifiable chrome covers. The worm clamps are perforated steel straps secured by a unmarried screw .
3. Slide both heat shields off the back of both mufflers by participation.
4. Loosen and remove the baffle screw on the backside of Everyone muffler with a 3/16-inch Allen wrench.
5. Pull the baffles from the mufflers.
6. Re-tighten the heat shields on the exhaust by tightening the worm clamp screws with a flat-head screwdriver.9. Transform the point caps on the ends of the mufflers and tighten the speck cap screws with a 3/16-inch Allen wrench.
Reinsert the contemporary or replacement baffles in the muffler shell with the thin side facing the front of the motorcycle and the fat side facing the back of the motorcycle so that the baffle screw-hole faces down.7. Re-secure the baffle in the muffler shell by reinserting the baffle screw in the baffle screw holes in both the baffle and the muffler shell and tightening the baffle screws with a 3/16-inch Allen wrench.8.
