The brakes on any vehicle, including a Toyota Corolla, Testament develop into worn and entail replacing. How regularly brake pads must be replaced depends on how yet the vehicle is driven and the Closeness and hardness of braking. Driving with worn or thin brake pads is very bad to you and other motorists. Replacing the brakes on a Corolla can be completed safely Homewards with a hardly any tools.
Instructions
Instructions
1. Loosen the lug nuts with the lug aficionado wrench, on the contrary end not remove them. District the jack under the frame of your van, under the front or rear neb, depending on which side you are starting. Settle the caliper down, gently, since it is connected to the brake lines. Do not damage the caliper.3. Put on the mask and gloves.
Remove the lug nuts, and pull the shove off the axle. Establish the caliper, brake pad and rotor. Custom the wrench to unbolt the caliper from the brake pad. Jack the Corolla, so the tires are off the ground. City the jack stands under the frame on Everyone side, endure the wheels. This Testament back the machine, whether the jack fails.2.
Avoid exposure to the brake pad dust. Remove the old brake pad. Apply the C-clamp to compress the brake piston, which will reset the brakes. Put the new pad on, and attach the caliper to it with the wrench. Remove the C-clamp.
4. Put the wheel back on the axle, and replace the lug nuts. Fully tighten the lug nuts with the lug nut wrench, after you have replaced the opposite side brake pad and lowered the car.
