Keep your hand on the tail light when you remove the second rivet as it may fall out. Remove the tail light to expose the wiring connector.2. Unplug the wiring connector behind the tail light.
1. Extensive the rear hatch and remove the two miniature round jet plastic rivets on the side of the tail-light globe. Act this by urgent the pin in the centre in and then prying the rivet absent with a screwdriver.Wiring a vehicle for a trailer connector was once a eternity consuming project. Everyone order had to be located with a confirmation bright and spliced to the trailer connector. With the advent of the wiring adapter a sporadic senescence ago, this once effortful mission has come a still easier project, one chipper within the abilities of the principles do-it-yourselfer.
Instructions
3. Plug the T-One connector in to the plug from the vehicle, then plug the tail light into the other side of the T-One connector.
4. Replace the tail-light, routing the T-One harness through the area between the tail light and the body. Reinsert the plastic rivets and reinstall the center pin in the rivet.
5. Secure the flat 4-trailer connector located on the end of the T-One harness to the trailer hitch with a nylon wire tie.
