Pay close attention to the feeder wheels on MIG welders.4. Stretch the lead of the welder, allowing the gun or torch to spin freely to remove twist from the lead.5.
1. Lasting the shielding Gauze bottle valve off by turning the employ counter-clockwise until the handle stops turning.
2. Turn off the welding machine.
3. Blow out the welding machine with an air hose to remove dust and debris from the internal components of the welder. Inspect the internal consumable components for wear or binding points.Properly closing down welding Accoutrement behind of a workday Testament extend the continuance of the Accoutrement. Leaving the welder running overnight causes the internal components to wear rapidly, and provided you freedom your shielding Gauze bottle valve expansive, Gauze Testament seep outside of the regulator meeting overnight, still whether there are no explicit signs of damage to the meeting. Lastly, closing down the welding Accoutrement helps control leads from twisting, as you want to loop the cutting edge to store it until the launch of the closest shift.
Instructions
Loosely wrap the lead around the lead holder or handles of the welding machine. Inspect the lead for damage as you wind it into place. If you find any damage, report it to your supervisor.
6. Remove the grounding clamp from the work surface.
7. Inspect the grounding clamp for damage or loose hardware. Tighten bolts that have worked themselves loose during the course of your shift.
8. Examine the grounding cable for signs of heat or abrasive damage.
9. Wrap the grounding cable loosely and hang it on the welding machine.
