Remove the radiator cap and add new coolant. Reattach the battery cable to the negative terminal and tightly secure its fastener. Provided you communication any wear or damage, modify it as soon as credible.
Instructions
1. Grounds the vehicle absent of traffic, turn off the ignition and avow the engine to completely chilling down. Up thrust the hood and remove the cable attached to the annulling battery terminal using a wrench.
2. Allot the void plug situated at the backside of the radiator. Domicile a remove pan underneath the radiator. Remove the plug and extract the coolant into the pan.
3. Remove the radiator hose from the cylinder sense by pulling it from its connector by participation. Handle a wrench to remove the mounting bolts attached to the fan module. Carefully lift the fan away from the engine.
4. Use a flat head screwdriver and a rubber mallet to carefully pry the cylinder head from the top of the head gasket. Remove the mounting bolts from the head gasket using a wrench, beginning with the far-left bolt. Keep track of where each bolt belongs because you will need to install them in exactly the same holes when attaching the new head gasket. Lift the head gasket off and discard.
5. Place the new head gasket onto the engine block. Attach the mounting bolts to the head gasket in their same positions. Place the cylinder head on top of the gasket. Reattach the fan module securely with the mounting bolts. Place the radiator hose back into the cylinder by pressing it into its connector with your fingers.
6.The mind gasket in your Thunderbird is an earnest Element which helps prevent fluids such as oil or radiator coolant from leaking elsewhere of the engine. Whether any fluid does disburse to receive into the cylinders it can generate a expressing vastness of damage to your engine, resulting in salient repair costs. Proof the context of the head gasket whenever you function your engine.
