Provided a firm battery terminal needs to be replaced, it is normally now it is hunched, broken or corroded. Battery terminals are untrue of bob and are too soft. Corroded terminals Blop voltage significantly both outlook and going, which process the usable voltage Testament Blop finished resistence from the corrosion and the voltage travelling back to charge the battery Testament be reduced.
Instructions
1. Disconnect the opposite battery terminal and then the positive battery terminal using a wrench. If the terminal is damaged and difficult to remove, use the pliers to work it off.
2. Do not tighten further or it will eventually break. Install the negative battery terminal the same way.4.
3. Clean both battery terminals with the battery terminal cleaner. Push the cleaner on the top of the terminal and twist it several times To cleanse off all the corrosion. Install the positive terminal on the battery and only tighten it enough with the wrench to withstand twisting by hand. Cut the terminal off the positive cable directly behind the terminal. Strip the insulation on the cable back One inch, using the wire cutters. Loosen the two bolts on the cable mounting side of the terminal and push the cable under the clamp. Tighten the two bolts securely with a wrench.
Grease both terminals to prevent corrosion.
