Interchange the CD brakes on a Two thousand Toyota Camry
The braking operation on the 2000 Toyota Camry is designed to aim the machine by applying the brake pads to the Apartment lodgings portions of the brake rotor. When the Chauffeur pushes in on the brake pedal, the brake fluid travels down washed-up the brake fluid lines and into the brake caliper. The brake caliper then compresses the inner and outer brake pads to the brake rotors. This is the entire braking channels for stopping the Camry. Many mechanics reccomend that the brake rotors be engine turned or replaced when the brake pads are changed.
Instructions
1. Arena the Two thousand Toyota Camry in a unharmed environment with a Apartment lodgings surface. Agape the hood and set the brake fluid reservoir conscientious below the skillful brake cylinder. Unscrew the cap from the brake fluid reservoir and stick the brake fluid Emigration syringe inside of the reservoir. Suck outside a syringe adequate of brake fluid and locate the syringe in a unharmed berth. Deposit the cap back on the reservoir. Shut the hood on the other hand conclude not lock it down.
2. Remove the hub cap from the front driver-side turn. Loosen the lug nuts with a lug wrench or a tire belongings. Deed to the front passenger-side spin and effect the equivalent business.
3. Slide the jack up under the Camry and position the jack under a secure jacking objective such as the cross frame below the engine. Jack the Camry due high-reaching Sufficiently to levy the jack stands under the jacking points on both sides of the vehivle. Tolerance the jack in the upright position.
4. Remove all of the lug nuts from the front driver-side revolve and pull the circle off the hub. Place the trundle down Apartment lodgings.
5. Slide the flat-head screwdriver into the top opening of the brake caliper. Put the cap back on and close the hood.12. Crank the Camry up and push the brake pedal in and out five or six times to fit the new pads to the brake rotors. Then, turn the engine off.
7. Remove the inner brake pad from the brake caliper. Position the C-clamp inside the caliper and compress the outer brake pad In relation to the caliper cylinder until it is completely inside of the caliper.
8. Unscrew the C-clamp and remove it from the brake caliper. Pull the outer brake pad gone of the caliper along with any shims and other brake pad accessories.
9. Subsume the recent brake pads along with any shims and other distinct brake pad accessories into the caliper. Situate the brake caliper with the advanced brake pads back onto the brake rotor. Then, reverse the corresponding steps above for reinstalling the caliper and the rotate.
10. Motion to the front passenger-side wheel and follow the same above instructions for changing the brake pads. Then, jack the front of the Camry back up and pull the jack stands out. Lower the jack and slide it out from under the Camry.
11. Put the brake fluid back into the reservoir by squirting the brake fluid out of the syringe back into the reservoir. Pry the brake caliper back and forth to the loosen the caliper from the rotor.6. Remove the caliper from the brake rotor by unscrewing the two upper and lower caliper mounting bolts with the 1/2-inch manage ratchet and a Fourteen mm socket. Pull the brake caliper off the brake rotor and hang it to one of the suspension components with a insufficient rope.
