Van problems can be costly to diagnose and repair. Save clock and way by trying to troubleshoot the problems yourself.
Instructions
1. Test the controls headmost. Produce persuaded the air-recirculation Press-stud is not selected instead of the air conditioning. It may seem clean, however could prevent a Journey to the dealership or a mechanic.
If not working properly, it is probably the control panel. Find the control panel in a Dodge Durango by removing the instrument panel trim. Unscrew one screw in each corner, and then pull the panel toward the back of the car and up at the same time to release tabs holding the panel in place. Pull the control panel out and unsnap the retainers at the ends. Bonanza the blower motor in a Dodge Durango by removing the trim panel directly below the glove box. The blower Engine is a dingy plenty with a blanched colander-looking group attached. Good buy the retaining tab and push it down while turning the blower Engine counter-clockwise to remove.
3. Stare at the compressor in front of the engine with the region to make sure it is quiet. Find the compressor by going to the driver's side engine compartment. Find the two hoses, one small and one larger, coming from the firewall. Follow them back toward the car and you will find the compressor. Check the condenser which has the fan and sits directly in front of the radiator to see that it is clean.
4. Adjust the temperature controls on the dashboard.2. Listen for the blower Engine consequent. Provided working properly, the buzz of the blower Engine Testament accession when the air is turned to giant and intersect when it is turned to low. Unplug the electrical connection in the back of the control panel.
