Place the new thermostat gasket onto the base of the intake and line up the bolt holes in the gasket with the bolt holes in the intake.6. Place the thermostat housing onto the thermostat gasket and bolt the housing onto the housing using the original 10-mm bolts.7.
When you concern the temperature gauge going higher than ordinary, it is generation to alternate the thermostat. It is practicable that engine buildup has accumulated encompassing the thermostat and has caused a mechanical failure. It's larger to spend a scarce dollars to alternate the thermostat then To admit it to develop into a costlier berth.
Instructions
1. Allot the thermostat housing by next the top radiator hose from the radiator to the Pontiac's intake. The hose connects to the metal thermostat housing.
2. Remove the radiator hose from the thermostat housing. Loosen the band clamp that secures the hose to the thermostat housing by using a screwdriver to turn the screw on the clamp counterclockwise. Pull the hose off the housing.
3. Remove the bolts that secure the thermostat housing to the intake with a 10-mm wrench and pull up on the housing to remove it from the intake. Observe the housing for any hairline cracks. Whether the housing is cracked, bag a different one. Otherwise, utilize the broken down housing.
4. Pull the aged thermostat absent of the intake of the Grand Am by pulling up on it. Discard the experienced thermostat. Assign the just out thermostat into the intake and orientate it in the same manner as the old thermostat.
5. Remove the old paper thermostat gasket from the base of the intake and discard it.
Provided you live with the thermostat it can payment you thousands in repair bills.Whether the thermostat in your One thousand nine hundred ninety nine Pontiac Grand Am SE stops working, you amble the risk of the engine overheating and warping. The repair fee To possess an engine machined can be indefinite thousand dollars.Push the hose back onto the housing and tighten the band clamp with a screwdriver.
