Hinge repairs ally the van doors.
Automobile doors tend to sag over generation, exclusively after a extended deal of handle. These sagging door problems are DIY fixes, on the other hand, and one of the most universal hinge repair issues. Aside from replacing the full hinge itself, fixing the pin inside of the hinge is one of the infrequent repairs within the span of the criterion handyman. Then replace them with new bushings. Use a pair of vice grips, or a hammer to press or tap them into place.5. Place the door up against the newly refurbished hinge, and line up the top hinge holes.
1. Remove the spring at the design of the door by prying it off with a prying bar. This is used to clinch the door extensive.
2. Cornerstone the door and tap gone the backside hinge pin by placing a nail punch under the spring and tapping the nail punch with a ball peen hammer. Lift up on the door to punch the pin completely on ice the hinge whether the pin gets pinched inside of the hinge pieces.
3. Repeat steps one and two on the remaining top hinge while someone holds the door.
4. Tap out the hinge bushings (which are like washers and located inside the door hinge holes) with the hammer and nail punch. It requires common shop tools and approximately an afternoon's payment of generation to outright this project. The consummation is a smoother-opening door.
Instructions
Insert a new hinge pin through the bushings to secure the door in place. Repeat this step with the bottom hinge.
