The front brake pads and the rear brake pads on the Two thousand three Harley-Davidson attach to the brake calipers, nevertheless the development used to attach the brake calipers to the motorcycle differ on both brakes. Happily, Harley used the alike mode for attaching the brake caliper to the caliper mounting bracket. This streamlines the mode of replacing the brake pads. When you modify the brake pads, you should Stare at the brake rotor and figure provided you should convert it at the alike allotment. Remove the skillful cylinder cap off the adept cylinder located on the due side handlebar. The include secures using two Allen bolts. Remove them with an Allen wrench.2.
Whether the rotor is excessively worn or grooved, you should moderate it.
Instructions
1.Remove the Allen head bolts that secure the front brake caliper to the front fork. There are two bolts, and they thread into the caliper mounting bracket from the front side.
3. Pull the caliper off the rotor. Pull the brake pads out of the caliper. Press the brake piston back into the caliper using a pair of pliers.
4. Place the new pads into the caliper. The pads do not secure into place. They simply rest inside the caliper.
5. Push the caliper back onto the brake rotor and secure it using the two Allen bolts and Allen wrench. Place the cover back onto the master cylinder with an Allen wrench.
6. Duplicate the process on the rear brake with the only difference being the location of the rear brake master cylinder. The master cylinder is located next to the right side foot peg and brake lever.
