Replacing the starter on the Hyundai XG350 is similar as any other vehivle. When you energy to begin the automobile and you hear a fast clicking sound, or maybe still extinction at all happens, you most practicable necessitate to transform the starter. It is not a demanding project. Someone with no knowledge working on automobiles could install the fresh starter in approximately an time and a half. This can save you a abundance of bankroll on labour costs at a repair garage.
Instructions
1. Direct the engine compartment of the Hyundai, and disconnect the adverse ("-") battery cable using a wrench. Distance the circle chocks persist the rear wheels of the Hyundai. Uplift the car on the driver side using the automobile jack. Place a jack stand under the car near the jacking point, and raise it to the frame.
2. Crawl underneath the car, and locate the starter close to the transmission. Disconnect the speedometer and shift control cables using a wrench. Label the electrical wires on the starter using the marker and masking tape. Disconnect the wires using a wrench. Unplug the wiring harness from the starter.
3. Remove the mounting bolts from the starter using a socket and ratchet. Take care when removing the last one that the starter does not fall on you. Start the Hyundai to test the new starter.
4. Jack up the car and remove the jack stand from under the Hyundai. Lower the car to the ground. Pull the starter away from the engine. Place a new starter on the engine, and tighten the mounting bolts with the socket and ratchet. Connect the electrical wires, and secure them with a wrench.
