8. Turn on the high beams. If the headlights are not properly sitting on the horizontal and vertical lines, then adjust as directed before. The headlight must be adjusted in disposal to right the shine beam back to centre.
Instructions
1. Pull the Chevy up to the wall.
2. Location elsewhere the centre of the glossy beams with vertical and horizontal pieces of tape on the wall. The lights should not be on at this objective, you are conscientious marking on the garage door or wall where the centre lines are duplicate for the headlights. This is why you've parked the Chevy so quick to the wall.
3. Back the Chevy up Ten to Fifteen feet.
4. Set the adjusting screws enclosing the headlights. They should be connected to the headlights, on the side or top of the headlights.
5. Wait until it is duskish and turn on the low beams.
6. Civility where the brightest point of Everyone low beam is Transplanting on the markings that you taped away on the wall. The brightest end horizontally should be decent below the horizontal line and much with the vertical.
7. Use the screwdriver to adjust the screws on or around the headlights to make the brightest point on the low beams shine just below the horizontal line.
Chevy, or Chevrolet, is a world-renowned alias in the automotive Production. Chevrolet makes many changed makes and models of cars, sport overhaul vehicles, vans, and pickups. Chevy headlights are designed to be adjusted, since sometimes a headlight can slip, causing the beam to fall off centre.
9. Turn on the low beams and make sure they are still correct.
