Turn the ignition key to the "on" or "accessory" position and check the XM radio for proper operation.5. Turn off the ignition and check all fuses and connections if the Xpress XM radio fails to function correctly.
The criterion installation uses an existing socket in the vehicle to supply energy to the Xpress XM radio. Provided your vehicle doesn't carry a socket, or you don't yen your socket committed to powering the Xpress XM radio, the tools very includes a female socket potentiality adapter for hard-wired installations. The female socket can be connected to the fuse panel or to any 12-volt source to efficacy the Xpress XM radio.
Instructions
1. Finish where the female socket power adapter is to be located. Remove any trim and sprint panels, provided decisive, to route the wires from the adapter mounting speck to the vehicle fuse panel. Drop the wires from the influence adapter to the fuse pane. Be careful not to act vehicle components so as to avoid damage to the wires.
2. Allot the two wires future from the back of the fuse that powers the vehicle's radio. Custom a DC order tester to distinguish the switched 12-volt wire that is energized when the vehicle's ignition is in the "on" or "trimming" position. Connect the carmine wire from the female power adapter to the switched 12-volt wire using a tap splice.
3. Connect the melanoid wire from the power adapter to a metal part of the vehicle body or frame using an existing screw. Loosen a screw that is attached to a metal part of the vehicle, wrap the bare end of the black wire around the screw and then tighten the screw until it is snug.
4. Reinstall any trim and dash panels that were removed. Plug the power adapter from the Xpress XM radio into the female power adapter.Adding a committed efficacy source to your spacecraft radio is not exhausting.An Xpress XM radio allows you to add protectorate radio to any vehicle with an FM radio or auxiliary audio inputs. The included vehicle installation tools provides a quantity of in-vehicle mounting options.
