Chevrolet Camaro
The Chevrolet Camaro is a classic American sports vehivle built by Usual Motors. Provided you longing to alter your aptitude window Engine, door lock actuator or speakers, you Testament head longing to remove the door panel to cut access. Remove the door panel in your Camaro with a unusual child's play tools by next these directions. The procedure Testament returns encircling Twenty minutes.
Instructions
1. Call the trim panel factor or a immature flathead screwdriver to carefully pry it off. Once it pops off, disconnect the module from the rear and set the panel aside. This panel is mounted on the door whether you have power windows or not.3.
Field your Camaro in a defended, well-lit direction. Disconnect the denying battery cable before installation the procedure.2. Remove the potential window/mirror switch panel mounted on the door panel.
Pull the interior door handle towards you to access the retainer screws behind it. Remove the screws and pull the entire door handle surround panel off.
4. Remove the manual window crank (if equipped). To remove the crank, insert the crank window tool between the door panel and the crank. The clip will pop off and then crank can be pulled off.
5. Remove the retainer screws around the perimeter of the door handle. Keep all of the screws in a safe place.
6. Push up on the door panel to disengage the clips, then pull the panel outwards. Do not pull it off without pushing it up first, as this will break the clips. Disconnect the tweeter connection (if equipped) and the courtesy lamp connection.
