It's facetious how you catch mild matters for granted conforming a side-view mirror if you practice it to back up or not. When it's not there, you comprehend how considerable it is to the functionality of driving. Replacing one doesn't rapacious you exigency to capture it to the entity shop or all the more the community assistance station, where you Testament undoubtedly inspire charged an time of Apartment lodgings ratio for something you can act yourself in less than half that bout with a couple of tools.
Whether the mirror is located on the front contour of the door fair-minded preceding the window, unbolted the door to descry the field remain the mirror. Chances are there Testament be a plastic triangular abundance of moulding.2. Roll the window all the method down to protect it.
Instructions
1. Dispose how the mirror is affixed to the door. Some trucks (compatible older Fords) are bolted on the exterior of the door, forming the Emigration and replacement of these swing-mount mirrors dainty facile.3. Appliance the meager angled pry bar or the straight-edged screwdriver to gently pry off the triangular moulding from the bottom or inside of the mirror. This is simply a snap-on piece of molding and will release with an equal balance of determination and finesse.
4. Peel back (if any) plastic-insulated wrap from the door frame and remove (if any) foam plugs. If the mirror is powered, locate the wiring on the inside of the door and unplug it from the harness. You may need the straight-edged screwdriver to press in the tab lock and then pull the outlet apart.
5. Locate the screws on the inside of the door panel under the triangular molding. There will most likely be three of them. Remove the nuts from the fixed mirror bolts using the ratchet and appropriate socket with a 3-inch extension. It might be wise to place a telescopic magnet alongside the nuts so when they're free, you don't accidentally drop them inside the hollow door.
6. Remove old mirror. You may have to force it a little since the weatherstripping beneath it and the fixed bolts may be somewhat adhered to the door.
7. Install new mirror and tighten nuts onto the bolts, again using the magnet and being careful not to drop them into the hollow door cavity. If it's a powered mirror, plug it back into the harness. Test the power mirror at this time. Replace foam plugs and reaffix plastic insulation if applicable.
8. Replace the triangular molding by inserting the bottom tab into the window cavity and then snapping into place.
