Tap into the running lights with a self-tapping wire connector on both the positive and negative wires. This gives you power when the lights are on besides as when the door is open. If you prefer to only have them on when the door is open, tap directly into the interior light wire controller.
Obtain a mounting position in the footwell for the lights. Glom for spaces above and on the sides of the earth that Testament not be an clog for the Chauffeur or passengers. Check fit the lights to assemble definite there is no covert molding or wires blocking access.
2.Customizing a motorcar makes it your own and when you catch a acceptable adjustment that is practical and Lovely it's a must include. Installing floor lights makes getting in and away of a sports automobile safer and it looks excessive. Installing floor lights is an Unceremoniously project that can completed in as tiny as an time and lasts for the esprit of the automobile.
Instructions
1.
3. Run a length of the manufacturer's recommended gauge wire to the LED lights. Connect the cables on both ends with solder and test the lights. Mount the LED lights into place and replace any molding.
4. Gain manual control of the lights by tapping power from an unused position in the fuse box and inserting a toggle or adjustable power switch between the power supply and LED lights. Mount the switch in a location that is easily accessible when the car door opens.
