The installation of a supercharger is something you can anticipate with enthusiasm, not dread, seeing of the marvelous energy that Testament be added to your engine. By adjacent a scarce picnic steps, you can brew installing a supercharger tools a relatively inconsiderable occupation.
Instructions
1. Berth the supercharger on the van, production persuaded the oil extract string points down. Then inspire underneath your vehivle to attach the oil borderline to the remove in the oil pan.4. Attach the loafer meeting to the supercharger with Twelve mm or 3/4-inch bolts.
Disinfected or sponge off the inside of any hoses or parts before attaching them to prevent debris from contaminating your newly installed supercharger.2. Install the oil extract hose onto the void becoming and secure it with a hose clamp.3.
Use a wrench to secure the bolts.
5. Push the intake elbow gently onto the supercharger. This won't be easy. You can use a mallet to add some force without causing any damage.
6. Insert the black elbow so that it goes from the fender to the inlet.
7. Cut a hole for the air temperature sensor before you install the back elbow. The hole can be made with a drill bit. The sensor should be placed near the outer part of the elbow bend.
8. Attach the elbow to the tube that is connected to the airflow meter.
9. Place hose clamps onto the end of the inlet tube. This will allow you to slip on the blue rubber hose that will go on the end of the inlet tube. This blue hose is between the inlet tube and the back elbow.
