The Dodge Grand Van is a minivan that has front- or all-wheel coerce. The Company's rear seats can be folded down or removed to access cargo-carrying ability, nevertheless that may not be Sufficiently for some owners. For vehicles that did not come with the foundry trailer-towing carton, an aftermarket trailer hitch can be installed. The machine's haul interval then be supplemented by towing a overhaul or goods trailer.
Instructions
1. Slide under the rear of the motorcar and fix the rearmost muffler hanger bracket mounted to the true side frame lambaste. Loosen and remove the bracket bolt with a socket and ratchet wrench. Remove the bolt and corner it aside. Acquiesce the muffler to hang down to arrange installation of the hitch simpler.
2. Remove the existing bolts from the welded-in nuts on the underside of the ends of Everyone frame rail with a socket and ratchet wrench. Domicile the bolts aside.
3. Place the plastic rivet that attaches the backside of the left side rear inner fender liner to the left side frame inveigh. Pry the rivet away with a Apartment lodgings blade screwdriver and discard it.
4. Elevate the hitch into position under the automobile and column up the holes in the mounting flanges on Everyone side of the hitch with the bolt holes where you removed the existing bolts in the frame rails.
5. Thread the bolts you removed earlier completed the hitch mounting holes and into the welded-in nuts on the frame rails, and tighten them finger-tight. Slide the hitch In relation to the left side of the motorcar so that the side of the hitch is up against the chapter metal Timber pan. Thread the original retaining bolt through the bracket and into the frame and tighten it with a socket and ratchet wrench.
7. Raise the muffler into back into position with one hand. Rotate the muffler hanger bracket so that it will clear both the frame and the exhaust pipe. Tighten the bolts to the specifications in the hitch directions using a socket installed on a torque wrench, normally to between Fifty and One hundred foot pounds.6. Trim the plastic fender liner with a utility knife if the hitch interferes with its positioning. Do not install the original retaining rivet.
