It's daily for a Chevy flex plate to rust Sufficiently environing the crankshaft to reason a occupation in Emigration. There's a stuff that is designed to turn the flex plate or flywheel--a spanner wrench that grips the flex plate. The flex plate is onliest used in vehicles with an automatic transmission and is bolted directly to the crankshaft. Its relevant design is the transfer of the engine's competence to the transmission via the torque converter bolted to the flex plate.
Instructions
1. Exercise rust penetrant to the crankshaft at the flex plate contact surface. Install vice receive pliers on either side of the flex plate and lick to rock it back and forth to remove it.
2. Application also penetrant and exercise the flex plate spanner wrench to dab to spin the flex plate on the crankshaft. Apply a heat source to the flex plate to expand it. The flex plate will be hot, so use the vise grips to remove it from the crankshaft.
This should discontinuity the flex plate loose from the rust and advice in removal. If necessary, spin the flex plate a few times until loose and then use the vise grips to pull it off the crankshaft.3.
