You can remove the windscreen in your One thousand nine hundred sixty seven to One thousand nine hundred seventy two Chevy truck yourself in your residence garage, saving bankroll. To arrange the duty, you honest essential to obtain a meagre child's play tools from an auto parts store. You must to remove and convert your windscreen provided it has a lingering crack or a expressive chip. Normally cracks longer than six inches want replacement of the windscreen. Some little chips and cracks can be repaired by a expert, nevertheless it is always cool to alter the windscreen to deposit the occupants defended.
Instructions
1. Fix the retaining nuts on top of Everyone windshield wiper base. Remove these retaining nuts using an adjustable wrench. Pull up on the wipers to remove and set the wipers and retaining nuts aside.
2. Put on work gloves. Take a pry tool and pry off the rubber seal. A pry tool is used for the specific purpose of removing the rubber seal from a windshield. This tool can be purchased at most auto parts stores. Salvage or discard the windshield.5. Scratch off the urethane bead from the Chevy truck's windshield opening using a utility knife.
Push out the Chevy's windshield from inside the truck.
4. Go outside of the Chevy and remove the windshield from the front. Pull the rubber seal off of the windshield with your hands once it has been loosened with the pry tool. Throw away or recycle the rubber seal.3. Thread the windshield wire through the urethane and run it around the perimeter of the windshield to break the urethane seal.
You can leave some of it there, but try to remove most of it.
