Replacing the starter on your One thousand nine hundred ninety six Chevy Cavalier is done from the top of the engine compartment, production the venture potency faster and be accomplished in a shorter extension. Doing the donkeywork yourself Testament save you a excessive repair cost from a garage. A replacement starter for the Cavalier is available from the Chevy dealer or nailed down any auto-parts store.2. Place the starter between the front of the vehivle and the engine compartment. Remove the wiring-harness connector from the "S" terminal with a wrench and push the wires aside.
1. Good buy the abrogating battery cable limitation on the battery of your Cavalier. Loosen the retaining bolt from the cable purpose with a wrench, then remove the cable from the battery. Isolate the cable from the battery while you are working on the starter.
The starter sits on the front side of the engine, moulding it authentic accessible. Be careful to not damage the radiator as you attempt on all sides of the front of the automobile.
Instructions
Fix the battery cable running to the starter. Remove the battery cable from the "B" terminal on the starter using a wrench and push this wire aside very.3. Remove the two mounting bolts from the starter using a socket and ratchet, then slide the starter gone of the gap in the phone housing. Lift the starter absent of the engine compartment and locate it aside.
4. Lower a brand-new starter into the engine compartment and slide the nose cone on the starter into the gap in the ring housing. Install the two mounting bolts into the cutting edge starter and tighten them to Sixty six ft-lbs. with a torque wrench.
5. Install the battery cable onto the "B" terminal. Install the retaining stone and tighten it with a wrench. Plug the wiring-harness connector into the "S" terminal on the solenoid. Brew sure the locking tabs snap into place.
6. Install the negative battery cable end on the battery terminal and tighten the retaining bolt with a wrench.
