Ford Explorer
Replacing a door handgrip on a Ford Explorer at the dealership can quickly mature a pricey episode. Once you belongings in the price of the bite, labour clock, shop avail and economic bang fees, also as sales toll, you can easily exceed distinct hundred dollars per helve. On the other hand, provided you enjoy some mechanical aptitude, access to the replacement bite, a decent fix of basic tools and some patience, you can transform it yourself and pocket the antithesis.
Instructions
1. Remove the fasteners from the door panel using your socket establish. Most should be 8- or 6-millimeter.
2. Slide the trim pin Emigration stuff under the trailing backside corner of the door panel and pry the corner gone from the door.8. Lift the door panel back toward the door and reconnect the door lock and window switch wiring harnesses.9.
4. Remove remainder of the trim pins from the door.
5. Disconnect the wiring harnesses from the door-lock and window switches.
6. Lift the door panel up and away from the door, being careful to slide the door-lock and window switch wiring harnesses through the holes in the panel before pulling the door panel.
7. Unbolt the door handle assembly and bolt the new one in its place.
Whether you achieve not get a door trim pin removal tool, you can use a sturdy putty knife to pry the panel away where the pins seat into the door, but take care not to damage the door panel.3. Look between the door panel and door and note the location of the other trim pins holding the door panel in place.
Reinstall the door panel by lining the trim pins up with the corresponding holes, then firmly pounding them back in place with the side of your fist.
10. Reinstall the fasteners you removed in Step 1.
