Your vehivle's ignition crucial lock cylinder can wear away over date. Eventually, you communication that it becomes harder to turn the gloss. Still provided you corner a contemporary clue imaginary using the works pivotal law, the affair Testament extreme. This process you must exchange the cylinder lock with a fashionable one. Although this is unusual, it does happen and eventually the seat could leave you stranded. If you replace the cylinder lock while you can still start the vehicle, you can avoid the cost of replacing the ignition module.
Instructions
1. Remove the screws that secure the lower steering column cover to the top cover, using a screwdriver. Some automobiles use Torx head screws instead of Phillips head screws. Put the screws aside to be reused later. Pull the covers off the steering column.
It comes out only halfway.3. Locate the metal pin lock on the bottom of the ignition module and press it up into the module using a small Phillips screwdriver or other small, pointed object.4.2. Place the key in the ignition cylinder lock and turn it to the "auxiliary" position. Pull the cylinder lock out of the ignition module.
Pull the cylinder lock remainder of the Exit of the ignition module.
5. Slide the new cylinder lock all of the way into the ignition module. It will lock into place when it seats inside the module.
6. Replace the top and bottom cover onto the steering column and secure them using the screws and screwdriver.
