There are two types of headlight replacement options on a Chevy Blazer depending on the year. The older type takes the old-fashioned sealed beam replacement headlight and the newer type of Blazer takes the composite halogen bulb replacement. Neither are that arduous to silver and you can save yourself some labour charges by installing them yourself.
Instructions
Change the Sealed Beam Headlights on a Chevy Blazer
1. Remove the four screws from the headlight bezel with the Phillips sense magnetic-tipped screwdriver. There are two screws at the top on either side of the headlight and two and at the backside. Bring about not accidentally turn the headlight adjusting screws.
2. Remove the bezel.
3. Remove the sealed beam headlight from the headlight cavity and unplug the wire from the back of it.
4. Plug the wire into the back of the latest sealed beam headlight and comprehend it into the headlight cavity.
5. Exchange the bezel and screws and tighten. Comp the headlight to create undeniable it's working.
Unmarried unit headlight assemblies manipulate the identical bulb for big beam and low beam.10. Unplug the wire going to the bulb and turn the bulb counterclockwise at the back of the headlight meeting and remove it.
7. Remove the jet protective caps from the top of the jack screws.
8. Remove the jack screws using the ratchet and the 3/16-inch 6-sided socket.
9. Pull the headlight meeting from the headlight meeting cavity. Some Blazers may keep side-by-side units so whether this is the condition, build trustworthy you be schooled whether you're replacing the big beam or low beam.
Change the Halogen Headlights on a Chevy Blazer
6. Expanded the hood and allot the jack screws near the headlight assembly on the upper radiator assist.11. Cover the original bulb into the headlight meeting, however determine not touch the glass bulb of the advanced headlight. Oils in our skin can compromise the life span of a halogen bulb.
12. Plug the wire back into the headlight and turn it on to test it. If it tests okay, reinsert the headlight assembly into the cavity and line up the jack screws. Tighten the screws and replace the protective caps. Remove the tools and old headlight and close the hood.
