Although there are abundant design Fords for the year 2006, including the Expedition, the Target and the F-series pick-up trucks, they all characteristic in-line fuel filters that donkeywork nearly automatically. The fuel filter receives fuel from the fuel pump. It catches pollutants in a cartridge. The fuel exits the filter and Release to the fuel injectors. This step works continuously when the vehicle is on. Getting a fresh fuel filter on a Ford to begin working at ahead, though, can be tricky whether you don't differentiate prime it. Happily, doing so is a assignment that takes honest a hardly any seconds.
Instructions
1. Free the hood of your Two thousand six Ford. Cast for the fuel coercion valve on the frame castigate near the fuel injectors. Lay a rag over the fuel energy valve. Press down on the valve. This releases strength from the fuel process, forging it unharmed to remove and interchange a fuel filter.
2. Lay your 2006 Ford's emergency brake on. Up thrust your 2006 Ford on the side of the vehicle that features the Gauze filler cap with your vehicle jack. The position of this cap indicates which side of the vehicle the fuel filter is on. Changed Ford models position their fuel filter on contradistinct sides of the underbelly of the chassis. The fuel filter is on the left side of the Ford Explorer, on the contrary on the hold water side of the Ford Mustang, For instance. Slide your jack stand below the chassis. Lower your Two thousand six Ford onto the jack stand for added safety.
3. Settle on your latex gloves. Slide the drainage bin below the fuel filter, which looks compatible a little, cylindrical can with two pipes attached to it.
4. Capture the follower on the fuel filter's Issue side--the side with the channel heading toward the engine, with your crescent wrench. Leave the key in the "accessories" slot for a few seconds. Return the key to the "off" position.9. Repeat Step Seven and Eight two more times. Face the drainpipe toward the drainage bin to let any fuel in it leak into the bin. Repeat this evolution for the intake pipe--the one forthcoming from the fuel container.
5. Loosen the bolt holding the fuel filter bracket with your crescent wrench. Pull outside the fuel filter from the bracket.
6. Embrace the replacement fuel filter into the bracket. Orient the replacement fuel filter in the equivalent approach the previous fuel filter was oriented: outlet end, which has an "out" arrow" on it, facing the outlet pipe and the inlet end, which has an "in" arrow, facing the inlet pipe. Attach the pipes to the new filter. Tighten the bracket bolt to secure the fuel filter in place.
7. Insert the ignition key into the ignition. Turn the key to the slot marked "ACC," which stands for "accessories." This slot engages the car's battery but not the starter motor.
8. Capture the collar of the outlet pipe with your other crescent wrench. Turn the Issue conduit's collar counterclockwise to loosen it from the fuel filter. Pull off the Issue channel.
This action fills the new fuel filter with fuel and pressurizes the fuel lines.
10. Look below your Two thousand six Ford for any leaking fuel from the fittings you just joined. Readjust the fittings if there are any leaks. Lower the vehicle to the ground.
