The Mercury Villager is a minivan designed for families, from its roominess to its fuel efficiency. The Villager is in agreement to the Nissan Search minivan base in its replica and its fuel conservation. Eventually, all the more the fuel tank Testament discontinuity down, so see the native land of your Two thousand one to Two thousand eight Mercury's fuel receptacle to peruse if it needs replacing. Happily, this is likely to discharge yourself.
Instructions
1. Accessible the fuel vat by removing the fuel tank filler cap. Settle in a siphon hose to empty the the rest of the fuel into a fuel container. Unplug the abrogating battery cable from the machine battery. Bed your Villager on jack stands. Grip off the splash shield located on the receptacle's front.
2. Use your torque wrench to tighten the tank retaining bolts back onto the fuel tank. Reattach the fuel tank filler hose and the vapor hoses onto the fuel tank. Also reconnect the fuel feed, return lines and the electrical connector on the top and rear of the fuel tank.5. Untie the fuel cistern retaining straps. Lower the fuel cistern onto the ground with a floor jack.
3. Dispose your distinct fuel receptacle from any Car avail store whether your happening Mercury fuel vehicle is too corroded or has any too many cracks. Raise the fuel tank with the floor jack underneath the trunk of your Villager. Tie the fuel tank retaining straps back around each side of the fuel tank.
4. Disconnect the fuel provisions, repay lines and the electrical connector from the top and rear of the fuel cistern. Detach the fuel tank filler hose and vapour hoses. Remove the fuel cistern mounting bolts with a torque wrench to boost access to the receptacle.
Attach the splash shield back onto the front of the fuel tank. Get your fuel container and empty its contents back into the fuel tank. Reconnect the negative battery cable on the car battery. Restore fuel pressure by covering the fuel tank with the fuel tank filler cap.
6. Put a towel underneath the Villager to catch any fuel leaks. Also check for any loosely connected wiring before going any further. Test your engine to see if everything in your Mercury is working. Allow your engine to run for a few minutes. Once you confirm everything is working, continue your daily driving routine.
