Your Acura Integra's cooling manner works to care for the vehivle from overheating. But, whether there are leaks in the development, the engine can malfunction causing austere damage. That's why you should be vigilant in checking for cooling system leaks. These leaks may be incomplex to spot or they may desire distinctive measures to fix upon the creator. Either course, periodic investigation of the cooling development is an admirable preventative prolongation degree.
Instructions
1. Extended the hood and securely prop it up. Pride the water pump on the Acura Integra and proof the shaft seal for any cooling system leaks. The soak pump is on the front of the engine, in latest the radiator and the shaft seal connects the two. Provided there's a leak, you'll examine either modern coolant leakage or discolouration from older leaks.
2. Avail a flashlight to analysis the radiator for any imaginable leaks. Be sure to examine the radiator from every possible angle to verify any leaking. Take off the radiator cap once again and verify the coolant level. If it dropped, you may have a coolant leak. Some leaks are internal and periodic coolant level checks are the only way to determine if this may be the problem.
Look for any cracks, splits or signs of excessive wear.
4. Remove the radiator cap and add more coolant to the radiator until it's about to overflow. Then, close the hood and with the heating system on high, take the Acura Integra out for a 15-minute drive. Once you return, pop the hood and touch the radiator. If it's warm, wait for it to cool down.
5. Pay special attention to the radiator seals and the radiator core.3. Inspect all the hoses that connect the engine with the radiator and heater core. Because these hoses are rubber, they're extremely susceptible to leakage.
