Modify the brake shoes on a Chevy Aveo yourself.
Chevy introduced the Aveo in Two thousand four to exchange the Underground. The vehicle uses an anti-lock braking method with drum brakes in the rear. The rear brakes peerless accommodate Thirty to Fourty percent of a vehicle's stopping force and so effect not acquire to be replaced as usually. You compulsion individual accepted dope of cars to interchange the brake shoes on the Aveo yourself. Replacement brake shoes are available at district auto-parts stores.
Instructions
1. Loosen the lug nuts on the rear wheels using a lug wrench.
2. Stand the vehicle using a floor jack.10. Attach the parking brake cable to the lever and custom pliers to hook it into the slot to secure it. Using pliers, install the lower give back spring by pulling it into apartment.11.
4. Remove the axle follower using a wrench and socket. Pull the brake drum from the axle. Provided the drum does not come off easily, practice a hammer to hit the sides of the drum to loosen any rust or corrosion that is holding it in distance.
5. Loosen the occupation down give back spring from the substantial brake shoe using a wrench and socket. Disconnect the upper link of the connecting link spring using pliers.
6. Remove the upper return spring and adjuster using pliers. Benefit pliers to disconnect the return spring from the trailing brake shoe. Unhook the parking brake cable to disconnect it
7. Remove the trailing shoe from the backing plate. Disconnect the lower come back spring using pliers.
8. Disinfected the drum and brake parts with brake parts cleaner and a rag. Employ a glowing coat of brake grease to the brake adjuster.
9. Install the trailing shoe and lining. Install the control down spring, washer and pin using pliers.
Settle jack stands below the vehicle for buttress.3. Remove lug nuts and wheels from the vehicle.
Install the valuable brake shoe and lining. Lock the shoe in domicile with the Celebrate down spring, washer and pin. Using pliers, connect the lower go back spring to the front shoe by pulling it into apartment. Turn the adjusting pin in and abode it into the slot between the two brake shoes.
12. Re-attach the primary shoe upper link spring. This Testament add tension for the transmit spring. Install the reinstate spring by pulling it in place using the pliers.
13. Reinstall the brake drum. Tighten the axle nut with the wrench and socket.
14. Repeat the steps on the opposite wheel.
15. Place the wheels on the vehicle and loosely place the lug nuts onto the wheel studs.
16. Raise the vehicle with the jack and remove the jack stands from beneath the vehicle.
17.Tighten the lug nuts onto the wheel studs using a lug wrench.
18. Pump the brakes several times to seat the brake shoes into place against the brake drum walls.
