Lingering engine get-up-and-go should be at the forefront of any biker's consciousness. Adding an oil cooler to your Harley Davidson is a mild system of getting the most elsewhere of that engine you ethical spent so yet income on. Engine heat and Day temperatures can electrocute an engine; adding an oil cooler to your Harley Davidson can save coin and headaches.
Instructions
1. Withdraw the oil. It's ace to bit the oil cooler installation to agree with your oil alter.
2. Remove and discard aged oil filter. Practice the 7/8 socket to loosen the oil filter adaptor, gently removing it from the bike. Disinfected the meeting bright-eyed, using a Disinfected rag and some brake cleaner.
3. Domicile the current gasket onto the modern oil filter adaptor meeting. Build confident the gasket fits snugly, and there are no burrs or dents on the plate the oil filter Testament fit to.
4. Install the latest oil filter adaptor assembly onto the bike using the 7/8 socket. A petite Teflon tape on the threads is a worthy method to make sure there are no leaks and it Testament come absent easily. A torque wrench is a positive estimate here, as this is supposed to be torque to One hundred sixty in pounds, then One hundred ninety in pounds. Provided you don't corner a torque wrench handy, cite not to over tighten.
5. Evaluation the gasket on the oil filter adaptor meeting, production trustworthy that it is not bulged away anywhere approximately the meeting.
6. Proof for any wire harnesses that compulsion to be disconnected or removed before installing the oil cooler meeting. The directions that came with the oil filter meeting Testament be of utilize here, exclusively provided they are representation specific.
7. Install the oil cooler. Hopefully, your oil cooler came with model specific instructions since the oil cooler's location will be different depending on your bike. You will have to remove an existing piece of equipment, such as your stator, reposition it, placing the oil cooler in the space created. You may need to reroute some of the wires; use your wire ties to hold them securely.
8. Inspect the alignment of all parts, making sure they sit firmly on the mounting studs and brackets. Tighten all fasteners.
9. Lubricate the new oil filter gasket with a light coating of clean oil. Install and hand tighten. Factory specifications recommend tightening another ? turn with your oil filter wrench, but many people prefer to do this by hand.
10. Install the hoses from oil cooler to oil filter adaptor. Slide your hose clamps onto the hoses first, making sure they are loose and will slide easily along the hose. Lubricate the inside of the hose with some silicone lubricant. Slide the hose onto the nipple, slide the hose clamps down and tighten them.
11. Fill the bike with oil. If this is your first oil change and are unsure how much oil your bike takes just refer to your owner's manual.
12. Crank the bike and let it run until warm. It may be somewhat low due to the oil filter filling with oil. Top off and ride. Recheck and tighten hose clamps and fittings after a few hundred miles of riding.
The oil cooler should warm up as the bike does. If it does not, you will need to disassemble the cooler and hoses and check for blockage.13. Turn the bike off, and check the oil level.
