The adept cylinder on your Dodge Three thousand five hundred is needful for the clutch hydraulic course to operate properly. Provided the skillful cylinder begins to fail, you should change it nowadays in disposition to prevent any damage to your Dodge 3500 Motor lorry. Installing a fresh crack cylinder is quite child's play, although it does cut a bit of allotment. You should be able to remove the gray-haired crackerjack cylinder and install a replacement in equal under an lifetime.
Instructions
1. Unbolted the Motor lorry's hood and capitalization a socket wrench to manually remove the negative terminal cable from the truck's battery.5. Lift off the rubber seal from the clutch master cylinder and disconnect all of the hydraulic lines connected to the cylinder.6. Twist the cylinder Forty five degrees and pull it out of the truck.
Remove the ring and washer from the clutch master cylinder pushrod with a socket wrench.
4. Remove the screws securing the master cylinder to the bracket with a Phillips screwdriver.
Locate the clutch master cylinder at the rear right of the engine compartment, mounted to the firewall.2. Remove the master cylinder's locating clip with a slotted screwdriver.3.
Install a replacement cylinder and rotate it to lock it.
7. Reattach the hydraulic lines and the rubber seal. Reinstall the screws, the ring, the washer, and the locating clip. Reconnect the battery and close the hood.
