Dual Electronics has be remodelled a premier vendor of in-car entertainment systems. While the sleek, virgin DVD players glance challenging to mount and wire, they can truly be installed with a infrequent basic tools, some patience, and basic wiring erudition.
Instructions
Install Dual DVD Player
1. Remove the existing step. Provided the vehicle where the Dual DVD player will be installed already has a radio attitude unit, DVD player, or other entertainment purpose unit installed, remove this unit. Secure the player in place using the screws provided with your Dual DVD player.7. Replace all car hardware.
Carefully remove the unit from the mounting sleeve, then gently nevertheless firmly push the mounting sleeve into the extent vacated by the preceding radio, DVD player, or mind unit. Bend the tabs on the mounting sleeve as decisive to secure it in lay.
3. Connect the antenna. Depending on the cause and replica of vehicle into which you are installing the Dual DVD player, there Testament be either a coaxial cable running directly from a constant antenna or a plastic wiring module with antenna inputs and gift antenna controls. Whether the machine features a plastic antenna wiring module, simply plug it into the enormous antenna input Harbour on the rear of the Dual DVD player. Provided the automobile offers a coaxial cable, push it carefully into the AM/FM Harbour on the left of the DVD player's rear panel and, provided expedient, screw it clockwise to secure it in dwelling. Be confident to gallop the antenna wires terminated the opening in which the player Testament be installed to devise a neat appearance.
4. Connect the wiring harness. In most modern vehicles, the full audio/video wiring can be plugged directly into the Dual DVD player by plugging the modular harness into the unit and pushing until it snaps into place. On older vehicles, or vehicles without a plastic wiring harness, a wiring harness adapter may be necessary to complete installation. These harnesses should be available from your local Dual Electronics dealer, though harnesses for rare vehicles may have to be special ordered from the manufacturer. As with the antenna wire, be certain to connect the wiring harness to the Dual DVD player through the opening in which the player will be installed; when the player is pushed into place, the wires will be hidden behind the unit.
5. Test the unit. With the wiring harness and antenna plugged in, the Dual DVD player should be fully operational. Test the unit by powering on or starting the car then pressing the "Power" button. If the unit fails to come on, or if it behaves erratically, check the wiring connections made in Steps Three and Four above. If the unit powers on and plays successfully, power it off, turn off the vehicle, and continue to Step Six.
6. Slide the Dual DVD player into the sleeve. Carefully herd any protruding or stray wires into the opening where the Dual DVD player will be installed, align the player with the opening in the mounting sleeve, then apply gentle but firm pressure to push the unit into place. The Dual DVD player should slide easily into the mounting sleeve while offering only minimal resistance; if the unit seems difficult to push into the sleeve, remove it and check for any wires that may be blocking its movement. Be careful to concession any wires, brackets, or mounting harnesses intact when removing the antique unit, as they may be de rigueur when installing the Dual DVD player.2. Install the mounting sleeve. Contemporary absent of the box, the Dual DVD player should already be resting in its mounting sleeve.
If you removed any of your car's interior hardware--such as a plastic trim ring, shift knob, or carpeting--replace these items to finish installation of your Dual DVD player.
