Fog lights on a Jeep.
Fog lights are used to supply extra flash when driving in foggy conditions. These lights assist drivers gaze the path and its markings so that they can stay in their alley. Mount the fog lambent control relay on the engine-bay wall lasting to the battery. Connect the firm blooming wire from the fog lights to the firm lights terminal on the relay. Connect the black wire from the fog lights to a metal part of the vehicle frame.4.
Disconnect the ebon colorless battery cable on the vehicle battery.
2. Place where the fog lights Testament attach. Most aftermarket fog lights utilize existing holes on the vehicle. Include the mounting bolts that come with the installation tools and secure both fog lights to the vehicle.
3. Route the electrical wires up into the engine bay. Tie-wrap the wires as you moxie. This Testament save age. For vehicles that determine not enjoy fog lights, aftermarket kits acquire been fictional to solve this disagreement. Installing one of these kits involves mounting the fresh lights, running latest wires, mounting a just out check relay and installing a fog-light switch on the dashboard.
Instructions
1.Connect the relay ground wire to a metal part on the vehicle frame. Drill a hole through the engine-bay firewall and insert a grommet into the hole to protect the fog light switch. Connect one end of the relay control wire to the relay's control terminal. Run the relay control wire through the grommet hole and into the passenger compartment.
5. Mount the relay control switch to the dashboard and connect the relay control wire to one of the two terminals on the control switch. Connect the second terminal of the control switch to a metal part of the car frame. Test the fog lights by turning the control switch to the "ON" position.
