2. Set the starter, which is under the Motor lorry at the backside of the engine, between the transmission and the engine.3.
The starter manner in a Ford Ranger consists of two parts: the solenoid that engages the starter to turn the engine and the starter protest itself. These parts are replaced separately.
Instructions
Removing the Starter
1. Arena your Ranger on a Apartment lodgings surface and establish the parking brake. Remove both battery cables, colorless and confident, and levy them absent from the battery. Stand the Motor lorry with a jack and field jack stands under the frame.
A 1990 Ford RangerProvided the starter on your One thousand nine hundred ninety Ford Ranger makes any clicking or grinding noises, or does not Eccentric person the engine, it needs to be replaced. The starter is an electrical Engine that engages the flywheel to turn the Engine which starts your vehicle.
Handle a socket and ratchet to remove the bolts from the ground cable. Holding memo of where this bolt goes into the starter. Sometimes this bolt is shorter than the starter mounting bolts.
4. Account a wrench, or a socket and ratchet, to remove the absolute cable from the top of the starter.
5. Remove the other bolts from the starter with the socket and ratchet; this Testament loosen the starter. Pull the starter absent and down to remove it.
6.
Replacing the Starter
7. Position the starter where you removed the doddering one, production confident it seats into the gap. Modify the top bolt and snug it hand-tight.
8. Slide the backside bolt finished the eyelet in the ground cable to ground the engine to the target.
9. Tighten all the starter mounting bolts with the socket and ratchet. Torque the bolts to Twenty ft.-lbs.
10. Reconnect the complete cable to the starter with a wrench production definite it is tight on the terminal.
11. Jack the truck up off the jack stands and remove them from under the truck. Lower the truck with the jack. Clean both battery posts and cable ends with a wire brush then reattach them to the battery and tighten.
