2. District the remove pan underneath the heater hose. Pull off the limit and allow the coolant to drain into the pan.3.
1. Establish the heater hose that you need to convert on the firewall. Advantage the pliers to Proceeds the clip on the objective of the hose by clamping the clip stable, then pulling the clip back on the heater hose down the border. Provided the heater hose has been replaced before, there may be a traditional hose clamp on the column, so loosen it using the flat head screwdriver.
Heater ventsThe heater on your Two thousand Chevrolet Silverado works by captivating the coolant from the engine, circulating it wound up a series of coils, and then using that to heat the air that goes away of the vents. The rubber that makes up the heater hoses can degrade over chronology, and they Testament charge to be replaced, otherwise you won't blameless lose heat, you'll further include a leak in the cooling step.
Instructions
Disconnect the other end of the heater hose line using the pliers or flat head screwdriver, then pull the line away from the vehicle and discard it.
4. Place the replacement heater hose on the original fittings and attach it using the hose clamps and the pliers, or the flat head screwdriver.
