Installing your own rear windscreen Testament save almighty dollar.
Rear windshields are held in area by a rubber seal that encases the edges of the glass and further locks the glass to the pinch weld on the Motor lorry. The pinch weld is the metal lip or groove that goes approximately the window frame. A lock seal goes encircling the away of the seal. The seal locks the glass in field, preventing it from popping absent. You require to enlist the guidance of an assistant to plentiful the replacement of the rear windscreen in a Motor lorry.
6. Place the window onto the edge of the pinch weld with assistance from your helper. While both of you are working on the outside, ask your helper to lightly push the glass onto the pinch weld while you pull out the nylon cord.
2. Include the flat-head screwdriver at the lower corner of the window, remain the chrome tab, in the contour of the seal. Pop elsewhere the corner of the seal and grasp it with your fingers. Pull the outer seal completely gone of the window frame.
3. Solicit your assistant to push on the glass from the inside while you are working on the gone. Deposit the flat-head screwdriver under the seal, in the lower corner, and pry the seal outside. The seal Testament enter on to pop absent of the pinch weld. Extend this deal sorrounding the glass until the window pops outside of the frame completely.
4. Squeeze a brief bead of weather stripping sealer into the slot where the glass seals into the inner seal. Install the seal onto the virgin glass.
5. Situate the nylon cord environing the seal, setting it where the pinch weld locks onto the seal.
Instructions
1. Embrace the Motor lorry's seats with the plastic sheeting and lay on the safety glasses. The cord allows the seal to lock over onto the pinch weld. Continue working around the glass until it pops into place on the pinch weld.7. Reinstall the seal around the outside of the glass by using the screwdriver to spread the seal apart, letting the locking seal lock onto the seal. Continue this action all the way around the glass. Clean off any finger prints and excess sealer with a window cleaner.
