When you alternate your brake pads, which is the simplest baggage of repairing the brakes on your automobile, you Proceeds the compel on the calipers that authority the brake pads against the brake rotors or disks. The friction of the pads against the rotors or discs is what stops the vehicle. Here is seat the virgin brake pads properly.
Instructions
Evaluation the crackerjack cylinder reservoir under the hood to dash off persuaded you keep Sufficiently fluid. If you don't, refill the reservoir to the fill line. If the level of brake fluid falls too low, air may get into the brake lines. Owing to the original pads are thicker than the older ones, you may compass to remove the inexperienced pads and spread the calipers a bit also to fit it environing the circle. Snug down the bolts to the caliper until it is in apartment, and then dish out the bolts one persist crack, tight turn on the wrench.
2.1. Reattach the brake caliper to the rotate. Create certain you accept compressed the caliper Sufficiently to fit it over the CD with the recent pads. Braking when air is in the lines makes the pedal feel soft due to the compressibility of the air.
3. Get behind the driver's wheel and press the brake pedal. This act forces hydraulic brake fluid into the brake system and applies pressure to the calipers on the wheels. As pressure is applied, the gap between the brake pads and the brake disc will close until the brake pads are seated on the surface of the disc. Pump the brake a few more times and make sure the pedal feels solid, with no softness. Hold your foot on the pedal and make sure itl doesn't start strong and then soften after a minute or so.
