Chevrolet equipped the Two thousand two model-year Blazers with a front bumper fascia panel which covers the coercion bar. This body-molded bumper coordinates with the colour scheme of the Blazer as it is painted to match the protest colour or match the trim colour. Blazers equipped with the Xtreme possibility combination gain a bumper fascia which wraps environing the front and extends lower to the ground, forging margin for in-bumper fog lights and giving a ground-hugging profile. Remove the bumper fascia provided it has sustained damage or you committal access to the appulse bar underneath.
Instructions
LS Bumper
1. Unfastened the hood. Grasp the grille at the top and pull it forward elsewhere of the radiator benefit. Disconnect the headlamp washer's filler hose from the back of the grille.
2. Disconnect the lawns/turn signals and the fog lamps from the back of the grille. Remove the push-pins that occupancy the bumper to the bump bar.10. Loosen the two bolts from the underside of the upper edge of the bumper with a socket and ratchet. Remove the bumper.
Loosen the two bolts from the underside of the upper line of the bumper with a socket and ratchet. Remove the bumper.
Xtreme Bumper
5. Stadium the Blazer on sure, flush ground and place the parking brake. Jack up the front of the Blazer and backing it on jack stands.
6. Disconnect the fog-lamp connectors on the back side of the bumper.
7. Remove the push-pin retainers that clutch the bumper to the hit bar. Remove the two screws holding the bumper to the bumper bedding. Remove the bumper.
Sport Bumper
8. Unlocked the hood. Grasp the grille at the top and pull it forward outside of the radiator buttress. Remove the grille.
9. Remove the grille.3. Push the ends of the bumper forward and then up to disengage the bumper retainers.4.
