Remove a Jeep Starter
Whether the starter on your Jeep ever goes outside, you'll be stranded wherever your Motor lorry happened to land; you'll want to establish it before you can propel it out. Happily, replacing the starter isn't a complicated course. It can be done in a parking piece whether essential be, on the other hand antecedent you must remove it. In this context, the project vehicle is a Two thousand two Jeep Wrangler with the 2.8l engine, on the contrary the system is coinciding for other vehicles very.
Instructions
1. Raise up the front of the vehicle using the jack and set it on the jack stands. Crawl underneath the vehicle and locate the starter, by where the transmission connects to the engine.3. Unbolt the wiring connections from the starter using an open-end wrench. Unbolt the starter from the engine using the 3/8-inch ratchet, extension and sockets.
Make sure that the vehicle is solidly on the stands before crawling underneath it.2. Disconnect the negative terminal from the battery using an open-end wrench. Then disconnect the positive terminal using the same method.
Lower the starter carefully away from the engine.
