A finished paint connection has a glass-like Stop.
Spraying the dye and clear-coat paint onto a motorcar is not the mark of the picture manner. For the cool results, the colouring needs to be completely finished. Finishing the tint involves sanding, buffing and polishing using precise steps, or the stain office can be ruined. The finishing method begins after the Ending light coat of stain has Dried apricot completely. Later the steps can ahead to a glossy, smooth, professionally finished colouring billet.
Instructions
1. Sand the surface of the vehivle with 1,200-grit sandpaper. Capitalization a running flood hose to carry the sandpaper wet the complete lifetime when sanding. This big grade of sandpaper Testament not aim immersed scratches or life through the clear coat paint, but it will dull the surface slightly. Keep your hand flat and sand the entire surface until the paint job is dull. Rinse the car and allow it to dry completely.
3. Apply car polish to a dry cotton towel. Use the towel with your hand to polish the car's surface. Work in small circular motions, in the same direction you buffed the car. Move the buffer in small circular motions, never leaving it in one place more than a few seconds as it can burn through the paint. Buff until all of the car has been buffed with the compound and the compound is no longer visible. The car's surface should appear glossy.
2. Use a buffer with a polishing pad to apply liquid rubbing compound to the surface of the car. Pour 1/4 cup of liquid compound onto the pad and buff the car, starting at the hood and working toward the rear of the car. Apply compound as needed. The polish makes the car's paint shine. A coat of wax can be added, but is not needed.
