Provided the ignition lock cylinder in your machine is damaged and not able to hand turn the ignition switch, your choicest funds of repairing it is to convert the cylinder altogether. Whether the lock is damaged so you can't much subsume the solution, you may devoir To look for crack cooperate in repairing it. Many cars include their own custom of how the steering line and ignition switch are allot up, so the process of removing the cylinder can vary.
Instructions
1. Disconnect the battery inside the engine compartment, loosening the cable clamp seed on the dusky battery cable and separating the cable from the adverse terminal. Operate an insulated wrench
2. Remove the steering-column covers from the contour. In most cases, remove the screws on the include's lower half with a screwdriver and seperate the two parts.
3. Insert the ignition key into the lock cylinder and turn it to the accessory position, which is in the opposite direction that you would turn it to begin the vehicle.
4. Insert a small rod or screwdriver into the small hole on the the lock cylinder's housing, which is often on the bottom of the housing. Press the retaining spring for the cylinder with the rod and pull the cylinder and key out of the housing together.
5. Slide the new lock cylinder, with its own key inserted, into the housing within the steering column. Position the cylinder so the key will be in the accessory position. Reconnect the negative battery cable with its cable clamp.
Turn the key to the "off" position and remove the key.6. Reconnect the covers for the steering column with their clips and screws.7.
