When your Civic starts to bring about a screeching, metal-on-metal sound when you brake, it is continuance to pin money your brake pads. Letting your pads drive without changing them when they open to bring about Clamour can be also malicious, both to you, your passengers, and other drivers and pedestrians. Changing brake pads can be a straightforward appointment, and provided you engage in it yourself, you can save a portion of boodle on mechanic costs.
Instructions
1. Turn the Civic off, and engage the emergency brake. Jack the front of the vehicle up with the floor jack, and distance the jack stands under the chassis on both sides. Lower the van onto the jack stands. Deposit circle blocks approximately the rear wheels.
2. Appropriate off the lug nuts that clench the tire in district with the lug wrench. Remove the tire, and levy it to the side. Manipulate the 12-mm socket and the ratchet to remove the two bolts on the back of the caliper that mastery it settle. Pull the caliper off the rotor, and let it rest on top of the rotor. Bring about not let it hang from the brake column. Spray the rotors with the brake cleaner.
3. Remove the experienced brake pads from the caliper bracket that is much on the rotor with a slotted screwdriver. Community the screwdriver between the brake pad and the caliper, and pry it outside; it should come outside with single a elfin achievement.
Place the new brake pads in the caliper bracket where the old brake pads used to be. Place the caliper back over the caliper bracket, and secure it into place with the two 12-mm bolts on the back of the caliper. Replace the tire, and tighten the lug nuts.6. Push the piston all the custom into the caliper. Remove the C-clamp and the old brake pad.
5.4. Dwelling one of the deficient brake pads against the piston that is in the caliper. Position the C-clamp so that one side is on the brake pad and the other side is on the back of the caliper. Application strength to the piston with the C-clamp, and push it back into the caliper.
Move to the other side of the vehicle, and perform the steps to replace the brake pads on that side. Raise the Civic up off of the jack stands and remove them. Lower the vehicle back down to the ground. Remove the wheel blocks.
