Provided you already posses an elaborate sound development in your van or you intend To possess one installed, you Testament appetite to arrange everything practicable to block absent path clang and to prevent vibration, resonance or rattling of the metal that can be caused by the playing of decided frequencies.
Instructions
1. Collect the consequent tools: bait chopper or scalpel, glue, hair dryer, curler, acetone and rags.
2. Allowance the sound-deadening data out in the sun to receive warm. If you are working on door panels that have ridges, make certain that the material fills the gaps, not just bridges them.7. Replace the dashboard, door panels, carpet and seats.
4. Use the acetone To cleanse the metal surface of the floor, the firewall, the doors and the trunk.
5. Spray glue on to the metal surface, peel off the backing from the deadening material and apply the material to the metal surface. Use the roller to make certain that the material adheres to the surface. Use the hair dryer to heat up the material so that it stays pliable as you apply it.
6. Roll out any bubbles or bumps to make sure that the material is applied smoothly. This will make it more pliable and easier to work with.3. Take out the seats, dashboard, door panels and carpet from the interior of the car and strip the carpet from the trunk.
