A ram air intake allows for air to enter ended an air duct at the entrance of the vehicle, normally sorrounding the bumper. The blasting air Testament movement finished the air duct and directly into the air box. This allows for bloodless air to be forced into your air intake. The ram air step as well allows for a greater acceleration scale, horsepower and Gauze milage.
Instructions
1. Remove the vocable lights on the lower allotment of your vehicle under the front bumper, provided all-important, using a screwdriver. Applicability extending wires and components to extend the wires of the lights. Bolt the lights upside down to the hardened plastic under the front of the bumper.
2. Remove the air box from the intake tubing and returns the air filter elsewhere.
3. Decrease the backside half of the air box off using a hacksaw. Divide fair-minded above the inventory intake holes. Leave enough of the air box so that the A/C hose will stay connected. Use the air conditioning duct to stretch from the signal lights hole to the cut off section of the air box. Place a large zip tie around the edges of the tube that connects to the air box to hold it securely in place.5. Install a mesh screen in the entrance of your intake tubing so that particles are not sucked through.
Remove the insulation from the A/C hose. Replace the air filter and the air box.4.
6. Install a metal shield around your air intake box by bending it to fit and using ties to secure it into place. This will allow for cool air To collect under the hood of the engine near the intake.
